Android ANU Secure connection guide

Describe the steps to connect ANU Secure or Secure 2 WiFi connection. Option 1 is the newest. Option 2 and Option 3 are for reference.

Option 1:

1. Open the Settings App
2. Turn on Wi-Fi and select Wi-Fi
3. Select the ANU-Secure SSID
   1. EAP method: PEAP
   2. Phase 2 authentication: MSCHAPV2
   3. CA certificate: Set to Use system certificates
   4. Domain (if applicable): anu.edu.au
4. Enter your login information:

• Username: University ID (eg. 'u1234567')
• Anonymous identity: Leave Blank
• Password: ANU password

Option 2:

1. Security: WPA2-Enterprise
2. Encryption: AES
3. EAP Method: Leave Blank or  EAP-TTLS
4. Inner Method: Leave blank or EAP-GTC
5. Identity: Uni-ID (without @anu.edu.au)
6. Anon Identity: Uni-ID (without @anu.edu.au)
7. CA Certificate: leave blank or auto-detect
8. User Certificate: none

Option 3: 

1. Open the Settings App
2. Turn on Wi-Fi and select Wi-Fi
3. Select the ANU-Secure SSID
   1. EAP method: EAP-TTLS
   2. Phase 2 authentication: Leave Blank (If avaliable)
   3. CA certificate: Set to Do not Validate 
   4. Domain (if selecting "Use system certificates"): Leave Blank
4. Enter your login information:

• Username: University ID (eg. 'u1234567')
  • Anonymous identity: Leave Blank
• Password: ANU password

Connect Verify connectivity. You should now see Connected under ANU-Secure. Tap ANU-Secure to bring a dialog box with connection status. Try browsing to an off-campus website to verify your connection is working

Note: Windows devices will default to use MSCHAPv2 if “PEAP” is selected under (EAP Method). Please make sure EAP method is either left blank or EAP-TTLS.